Aplica para:
| Marca | Modelo | Año Inicio | Año Fin |
| Honda | HR-V | 2015 | 2021 |
| Almacen | Inventario | Fecha est. de envio |
|---|---|---|
| Almacen Guadalajara | 0 | Se embarca en 24 hrs |
El tirón de arrastre Big Country esta diseñado para tener un ajuste perfecto sin necesidad de hacer alguna modificación al vehículo. Esta fabricado con materiales de alta resistencia y bajo los más altos estándares de calidad, además cuenta con un soldado de precisión para una fuerza y ajuste superior. Se recomiendan para portabicicletas o pequeños remolques.
Aplica para las versiones: UNIQ MT - UNIQ CVT - PRIME - TOURING
| Capacidad de la Carga | Capacidad de la lengüeta | Peso del producto | Dificultad de Instalación | Material | Terminado | Tamaño del Receptor |
| 2,000 Lbs | 200 Lbs | 12.1 KG | Fácil | Acero | Negro Texturizado | 2" |
| Almacen | Inventario | Fecha est. de envio |
|---|---|---|
| Almacen Guadalajara | 0 | Se embarca en 24 hrs |
Total Reviews (1)You must login to post a review.
Reviewed by: Francisco10/27/2020 08:11PM
Product ownership: Less than 1 month
Purchased from: Big Country | Realtruck
Comments:
I´m very happy with the quality of the product, but I had some problems with the installation:
1.- The installation kit only have 1 fishing wire, the hole used for the bolts is very tight and the wire is not very well after 1 use, so, in the next use is very difficult to pass the bolt, the kit should include 2 fishing wires and a little more lengthy or be prepared to get other one of those...
2.- The two main bolts are of the same length, the one that goes in passanger side will make contact with the muffler and it will create a big and unpleasent noise after start the engine, I had to put a piece of the same plastic that I cut in the other side temporarily (in case of single traction models you need to cut a plastic cover). I will need to uninstall, recover the bolt (wich will be very difficult reverting the fishing wire operation), cut the bolt and repair the thread and install it again (and I will try to find another fishig wire). Other brands came with different bolt lengths and now I know the reason...
3. After installation, one of the muffler suspension hangers that you need to disconnect, will not have enough room to snap it again, you will need a zip tie strap to pull the extreme of the hanger hole with pliers to reinstall, it should be guided with some tips in the instructions... your welcome